AC Shore Power Relay1 × $24.99Subtotal: $24.99
Showing all 11 results
Compatible with Siren 3 Pro & MTC
SM-ACC-ACRE
The AC Shore Power Relay is hardwired directly to the AC distribution panel. In the event shore power is lost, an alert is sent to the Siren Marine App. A certified marine electronics installer is highly recommended to install the AC Shore Power Relay.
Compatible with Siren 3 Pro & MTC
SM-ACC-DCRE
The DC Accessory Relay allows users to remotely control any 12V onboard device through the Siren Marine App. Devices can be activated manually or configured to be triggered automatically by an event.
Compatible with Siren 3 Pro & MTC
SM-ACC-EPIR
This compact and flush-mounted motion sensor detects unauthorized entry. In the event motion is detected, the Siren 3 Pro sends an instant alert to the Siren Marine App and can also trigger an audible alarm.*
* Alarm sold separately
Compatible with Siren 3 Pro & MTC
SM-ACC-SHOR
The Shore Power Sensor Plug detects if shore power has been disconnected or if there is a power outage at the dock. In the event power is lost, the Siren 3 Pro automatically sends an alert to the Siren Marine App. Avoid spoiled food, dead batteries or a costly system shutdown.
Get connected. Siren Marine’s new MTC Boat Monitoring and Tracking System relieves your worries about leaving your boat unattended on its trailer or in its slip. Monitor, track and control key systems that are shown below, and know that your vessel is safe from thieves, dead batteries or high water in the bilge.
SM-SAT-OFFS
The SirenSat Offshore antenna is used to communicate the boat’s position and track back to the Siren Marine App while the boat and Siren device is outside of cellular (GSM) signal. Power harness is included and must be hardwired to 12v. The power harness will not recharge the Lithium Ion Batteries. Also, this cable can be used to connect the SirenSat Offshore antenna to one or both of the wired security inputs.
Compatible with Siren 3 Pro only
SM-WLS3-BATT-917
Monitor battery voltage with the Wireless Battery Sensor, and never worry about a dead battery again. Attach the Battery Connector to one of the boat’s batteries and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the battery voltage exceeds or drops below a preset level. Ideal for monitoring multiple batteries on a boat.
Includes Wireless Sensor Module and Battery Connector with 3 feet of wire.
Compatible with Siren 3 Pro only
SM-WLS3-BILG-917
The Wireless Bilge Pump Sensor monitors bilge pump activity, including run time and daily cycles. Attach the Bilge Pump Connector to the bilge pump and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the bilge pump exceeds a preset run time or cycle counts.
Includes Wireless Sensor Module and Bilge Pump Connector with 3 feet of wire.
Compatible with Siren 3 Pro only
SM-WLS3-ENTR-917
Receive instant notifications if there is unauthorized entry on the boat. Perfect for securing lockers, doors, and hatches. Install the Wireless Module on one side of the door or locker and the Open/Close Magnet on the other side. Link to the Siren 3 Pro and receive alerts when the door or locker is opened or closed.
Includes Wireless Sensor Module and Open/Close Magnet.
Compatible with Siren 3 Pro only
SM-WLS3-HIWS-917
The Wireless High-Water Sensor detects if there is water in the bilge and sends an alert to the Siren Marine App if water has risen above the preset level. Mount the Water Probe at the desired height in the bilge and plug the other end into the Wireless Module. Link the module to the Siren 3 Pro and receive alerts if the boat is taking on water.
Includes Wireless Sensor Module and Water Probe with 3 feet of wire.
Compatible with Siren 3 Pro only
SM-WLS3-TEMP-917
Monitor the temperature of the cabin, engine room, bait locker, or fridge. Place the Wireless Module in the area that needs to be monitored, link the module to the Siren 3 Pro, and receive alerts if the temperature exceeds or drops below a preset level. The optional temperature probe can be used for measuring the temperature of specific equipment (e.g. engine) or hard-to-reach areas of the boat.
Includes Wireless Sensor Module and Temperature Probe with 3 feet of wire.